Semi-finished — film & polymer

Film, non-woven roll goods, masterbatch and polymer inputs. Bought by converters, and by manufacturers who run their own bag lines and need the material rather than the product. The same caution applies as to any roll good: fabric weight and structure are the specification, and both are easy to shade down invisibly.

Large white woven fabric roll on a laminating line unwind stand, the web running up over the rollers into the line — A full-width roll of woven fabric loading onto the laminating line.

14 products across 5 subfamilies. 8 have every process they need evidenced across our plants; the rest are marked Enquire rather than claimed.

Made in our plants every process this product needs is evidenced across our plants. Enquire we have not evidenced every process it needs — ask, and we will tell you honestly whether we make it, source it, or decline. See honest limits.

Film 4

BOPP printed film for lamination Enquire

Reverse-gravure printed BOPP film bought on the roll and extrusion- or adhesive-laminated onto woven PP fabric to give a full-colour, waterproof sack face.

Processes extrusion · printing · lamination
Plain BOPP film (clear / matte / pearlised) Made in our plants

Unprinted biaxially-oriented PP film used as a gloss, matte or pearlised laminating skin, or as the substrate a converter prints in-house.

Processes extrusion
CPP cast film Made in our plants

Unoriented cast polypropylene film used where a heat-sealable or metallised inner layer is needed instead of a stiff BOPP skin.

Processes extrusion
PE liner / tubular inner film Made in our plants

Blown LDPE/LLDPE film supplied as tube, sheet or pre-made liner bag and inserted inside woven sacks and FIBCs for moisture and leak protection.

Processes extrusion

Supplied as fabric, yarn or component into bulk-bag manufacture. We do not make finished bulk bags.

Non-woven roll goods 4

PP spunbond non-woven roll — bag grade Enquire

Heavier spunbond PP roll goods bought by GSM as the base fabric for cut-and-sew reusable shopping and promotional bags.

Processes spunbond-nonwoven · extrusion
PP spunbond non-woven roll — light grade Enquire

Low-GSM spunbond roll goods for hygiene topsheet/backsheet, agricultural cover and interlining rather than structural bag making.

Processes spunbond-nonwoven · extrusion
SMS / SMMS composite non-woven roll Enquire

Spunbond–meltblown–spunbond laminate roll goods that add barrier and liquid repellency to a spunbond feel.

Processes spunbond-nonwoven · extrusion
Needle-punch non-woven roll / short-fibre geotextile Enquire

Mechanically entangled staple-fibre PP or PET roll goods offering thickness, drainage and puncture resistance rather than a printable surface.

Processes spinning · extrusion

Polymer inputs 1

Virgin PP raffia-grade granule Made in our plants

Homopolymer polypropylene resin in the narrow melt-flow window that tape-extrusion lines need to draw stable, high-tenacity raffia tape.

Typical MFR 2.5–4.0 g/10 min (230 °C/2.16 kg); tensile yield ~33 MPa; grades T30S / S1003 / Z30S; GB/T 12670; 25 kg bag or 1.0–1.1 t jumbo

Processes tape-extrusion · extrusion

Supplied as fabric, yarn or component into bulk-bag manufacture. We do not make finished bulk bags.

Recycled & scrap 2

Recycled PP granule / regrind Made in our plants

Washed and re-pelletised post-industrial or post-consumer PP, plus unpelletised crushed flake, blended into tape or moulding to cut resin cost.

Processes extrusion · tape-extrusion
Baled offcuts & production scrap Enquire

Selvedge, trim, reject fabric and non-woven offcuts baled by colour and sold by the tonne back into the recycling chain or into an in-house regrind loop.

Masterbatch 3

CaCO3 filler masterbatch Made in our plants

Highly loaded calcium carbonate concentrate in a PP carrier dosed into tape, film and moulding to reduce resin consumption and stiffen the product.

Processes extrusion
Colour masterbatch Made in our plants

Pigment concentrate in a PP or PE carrier used to colour tape, non-woven and film to a customer's brand shade in-line.

Processes extrusion
UV / anti-static / flame-retardant additive masterbatch Made in our plants

Functional concentrates dosed at the extruder to give outdoor life, static dissipation or flame retardancy without changing the base resin.

Typical UV (HALS) 1–3% for 1–3 years outdoor exposure; anti-static surface resistivity 10^9–10^11 Ω; FR to UL94 V-0 or GB 8624 B1; PP carrier, 25 kg bag

Processes extrusion

Supplied as fabric, yarn or component into bulk-bag manufacture. We do not make finished bulk bags.